InstaCuppa Borosilicate Glass Teapot with Removable Stainless Steel Infuser, Perfect for Infusing Blooming Teas, Loose Leaf Teas, 1200 ML

Before first use, wash the glass teapot and stainless steel infuser with warm soapy water and rinse thoroughly. To brew tea, remove the infuser basket, add your desired amount of loose leaf tea or blooming tea into the infuser (typically 1-2 teaspoons per cup), place it back into the teapot, and pour hot water. Let it steep for 3-5 minutes depending on tea type, then remove the infuser to prevent over-steeping. The borosilicate glass can handle hot water directly, but avoid extreme temperature shocks like pouring boiling water into a cold teapot straight from the fridge. For blooming teas, you can watch the beautiful unfurling process through the clear glass walls, which is one of the main benefits of this design.

No, this teapot is not designed for direct stovetop heating. The InstaCuppa Glass Teapot is meant for steeping tea with pre-heated water, not for boiling water directly on a flame or induction surface. Borosilicate glass, while heat-resistant, should not be placed on direct heat sources as it can lead to breakage or safety hazards. Please boil your water separately in a kettle and then pour it into the teapot with your tea leaves in the infuser. This is a steeping vessel, not a heating vessel. For best results and longevity, always use freshly boiled water from a separate kettle or electric water heater.

Blooming teas work beautifully in this 1200ml glass teapot because you can watch the tea flower unfurl. First, heat water to about 85-90°C (just below boiling). Place one blooming tea ball directly in the empty teapot without using the infuser basket. Slowly pour the hot water over it and watch as the tea bloom opens up, which typically takes 3-5 minutes. The clear borosilicate glass provides a 360-degree view of this mesmerizing process. You can re-steep most blooming teas 2-3 times. After the first infusion, you can keep the bloom in the pot and just add more hot water. The wide mouth and large 1200ml capacity make this teapot ideal for showcasing these artisanal tea flowers at dinner parties or afternoon tea gatherings.

The InstaCuppa Glass Teapot has a 1200ml capacity, which is approximately 5-6 standard teacups (200-240ml each) or about 4 large mugs. This makes it perfect for serving tea to a small family or group of friends. The generous size means you won't need to brew multiple batches when entertaining. However, keep in mind that when you add the infuser basket with tea leaves, the effective liquid capacity reduces slightly. For everyday use, this size is ideal if you drink multiple cups throughout the day or want to share tea with others. It's large enough for gatherings but not so big that it becomes cumbersome to handle or pour from.

Yes, the teapot is made from borosilicate glass, which is completely BPA-free and safe for hot beverages. Borosilicate glass is a premium material known for its purity and thermal resistance. Unlike plastic containers, it doesn't leach any chemicals into your tea, even at high temperatures. This glass can typically withstand temperatures from -20°C to 150°C without cracking, making it perfect for brewing hot teas. The stainless steel infuser is also food-grade and safe. Because glass is non-porous and inert, it won't absorb flavors, odors, or stains from different types of tea, ensuring each brew tastes exactly as it should. This makes it a healthier choice compared to plastic teapots, especially for daily use.

The teapot uses borosilicate glass which is designed to be lightweight yet durable. While some customers have mentioned the glass feels thinner than expected, this is actually typical for borosilicate teaware, which achieves strength through its chemical composition rather than thickness alone. That said, we understand the concern. The glass thickness is typically 2-3mm, which balances heat retention, weight, and safety. It's designed for careful, normal household use. If you're worried about durability, handle it with both hands when full, avoid knocking it against hard surfaces, and don't subject it to extreme temperature shocks. While it's more delicate than a steel kettle, thousands of customers use it daily without issues when handled with reasonable care.

For daily cleaning, simply rinse the teapot with warm water immediately after use. For the stainless steel infuser, rinse under running water to remove tea leaves. For deeper cleaning, wash both components with mild dish soap and a soft sponge. To remove tea stains that can build up over time, fill the teapot with warm water, add 1-2 tablespoons of baking soda or white vinegar, let it sit for 15-20 minutes, then scrub gently with a soft brush. Avoid abrasive scrubbers that can scratch the glass. The wide mouth opening makes cleaning easy as you can reach inside comfortably. The removable infuser can be cleaned separately and is much easier to maintain than built-in filters.

While borosilicate glass is generally dishwasher-safe, we recommend hand-washing this teapot to extend its lifespan and prevent accidental damage. Dishwashers can cause glass items to knock against other dishes during the wash cycle, potentially leading to chips or cracks. The high heat and harsh detergents in dishwashers can also dull the glass over time. Hand-washing is quick and easy due to the wide mouth design, and it gives you better control over the cleaning process. The stainless steel infuser is also best hand-washed to keep the fine mesh in good condition. If you do choose to use a dishwasher, place the teapot securely on the top rack away from other items and use a gentle cycle.

Yes, the stainless steel infuser is completely removable, which makes cleaning very convenient. Simply lift it out of the teapot after brewing. The infuser typically consists of a basket with a lid and fine mesh walls. You can rinse it under running water to remove tea leaves immediately after use. For thorough cleaning, especially if you've been brewing different types of tea, you can soak the infuser in warm soapy water and use a soft brush to clean the mesh. The removable design is a major advantage over teapots with built-in, non-removable strainers which are harder to clean and can trap old tea residue. Make sure to dry the infuser completely before storing to prevent any moisture buildup.

This concern has been raised by some customers, and here's how to use the teapot safely: Always handle it with both hands when full, especially by supporting the base rather than relying only on the handle. Avoid placing it on hard surfaces without a coaster or mat underneath. Never pour boiling water into a cold teapot that's been in the fridge—let it come to room temperature first. When pouring, don't tip it too aggressively. The spout and handle are designed for normal use, but excessive force or awkward angles can stress these junction points. Keep it away from edges of countertops where it might get knocked over. While the glass is thinner than some premium brands, with mindful handling, it should serve you well. InstaCuppa offers a 10-day trial period, so if you're genuinely uncomfortable with the build quality, you can return it.

We're sorry to hear about breakage issues. Based on customer feedback, early breakage usually occurs due to thermal shock or impact rather than manufacturing defects. Thermal shock happens when you pour boiling water into a very cold teapot or place a hot teapot on a cold surface. Even borosilicate glass has limits. To prevent this, avoid extreme temperature changes, don't pour boiling water into a refrigerated teapot, and don't place the hot teapot directly under cold running water. Impact damage can occur from knocking against hard surfaces or dropping. If your teapot broke despite careful handling, please contact InstaCuppa customer service immediately with your order details and photos. The company offers a 1-year warranty and typically investigates such cases. Manufacturing defects are rare but possible, and genuine defects are covered under warranty.

The infuser should sit comfortably inside the teapot but won't create an airtight seal, which is actually intentional. There should be a small gap to allow water to flow freely around the tea leaves for proper infusion. If the infuser seems too loose and moves around excessively, ensure you're placing it correctly—the rim of the infuser should rest on the rim of the teapot opening. The infuser lid helps keep it stable during steeping. However, some variation in fit can occur. If your infuser is genuinely defective (wobbles excessively, doesn't sit level, or falls into the pot), contact customer service for a replacement. A properly fitting infuser should stay in place during normal pouring and steeping without rattling around significantly.

The key difference is the removable stainless steel infuser, which gives you much more control and versatility. With built-in strainers, tea leaves continue steeping even after reaching optimal strength, often resulting in bitter, over-extracted tea. With this removable infuser, you simply lift it out after 3-5 minutes to stop the steeping process, giving you perfect tea every time. The infuser is also much easier to clean compared to fixed strainers which trap tea residue. Additionally, you can use this teapot without the infuser for blooming teas or when serving already-brewed tea, making it more versatile. The borosilicate glass construction provides better clarity than ceramic teapots, letting you monitor your tea's color and strength visually, which is especially important for premium teas where visual cues matter.

This teapot is ideal for loose-leaf tea enthusiasts, blooming tea lovers, and anyone who appreciates the tea brewing process as much as the drinking. It's perfect for people who entertain guests and want to showcase beautiful blooming teas. If you're transitioning from tea bags to loose-leaf tea, this is an excellent starter teapot. The 1200ml capacity makes it suitable for families or small gatherings rather than solo drinkers (for that, consider a smaller 500ml option). It's also great for office pantries or tea rooms where multiple people share tea. However, if you need something extremely portable or unbreakable, or if you tend to be rough with kitchenware, you might prefer a stainless steel option. This is for those who value the aesthetics and ritual of tea brewing and can handle glassware with care.

You can absolutely use this teapot for brewing chai, though the process is slightly different from traditional stovetop chai. The best method is to brew your chai separately on the stove with milk, spices, and tea leaves as usual, then strain it into this teapot for serving. This keeps the chai hot and makes elegant presentation easy, especially when entertaining. Alternatively, you can brew a concentrated chai in a small pot, pour it into this teapot, and dilute with hot water or milk. However, this teapot isn't meant for making chai from scratch since you can't place it on direct heat. It's more suited for steeping-based teas like green tea, white tea, oolong, blooming teas, and herbal infusions. For traditional milk chai, you'll still need your regular stovetop pot for cooking, but this makes a beautiful serving vessel.

InstaCuppa offers a 1-year warranty on this glass teapot covering manufacturing defects. If you receive a defective or damaged product, you can return it within 10 days of delivery for a full refund or replacement. The return process is designed to be hassle-free—simply contact InstaCuppa customer service with your order details and issue description, preferably with photos. Normal wear and tear, breakage due to mishandling, thermal shock, or accidental damage are not covered under warranty. However, genuine manufacturing defects like faulty glass, defective infuser, or items arriving broken in transit are fully covered. Delivery typically takes 5-7 days across India. Keep your invoice and packaging for the first few weeks in case you need to initiate a return. For warranty claims after the 10-day return window, manufacturing defects are still covered for the full year.

If your teapot arrives damaged or broken, don't worry—this is covered under InstaCuppa's delivery guarantee. Take photos of the damaged item and packaging immediately upon receipt. Contact InstaCuppa customer service within 24-48 hours of delivery with your order number, photos, and description of the damage. They will arrange for a replacement or full refund based on your preference. Do not discard the packaging until the issue is resolved, as it may be needed for the return process. InstaCuppa takes care to package glass products securely, but transit damage can occasionally occur. Most delivery damage claims are processed quickly, typically within 2-3 business days of reporting. Always inspect the package upon delivery, and if the outer box shows signs of severe damage, you can refuse delivery or note the damage before accepting.

This teapot is manufactured in China and imported by InstaCuppa Services Private Limited, which is based in Tirupati, Andhra Pradesh, India. Like many glass and kitchenware products globally, manufacturing happens in specialized facilities in China that have expertise in borosilicate glass production. InstaCuppa imports these products, ensures quality standards are met, and handles all marketing, customer service, and warranty support from India. The company maintains quality control standards and provides local customer support, warranty service, and hassle-free returns—advantages you wouldn't get from directly imported Chinese products without Indian representation. All InstaCuppa products comply with Indian safety and quality standards for food-contact materials.

The InstaCuppa Glass Teapot package typically includes the borosilicate glass teapot body and the removable stainless steel infuser with lid. Please check the product listing or package contents section for exact inclusions, as offerings can vary based on promotional periods. Some packages may include tea samples or additional accessories, while the standard package focuses on the core teapot and infuser. The teapot does not usually come with a tea warmer, coaster, or additional infusers unless explicitly mentioned. If you're looking for complementary items like loose-leaf tea, tea warmers, or replacement infusers, these are often available separately from InstaCuppa. The included infuser is designed for repeated use and, with proper care, should last for years of regular tea brewing.

As a general guideline, use approximately 1 teaspoon of loose-leaf tea per 200ml of water. For the full 1200ml capacity, that's about 5-6 teaspoons or roughly 2 tablespoons of tea leaves. However, this varies significantly based on tea type and personal preference. Delicate teas like white or green tea need less, while robust black teas or herbal blends might need more. Start with the standard ratio and adjust to taste—if your tea is too weak, add more leaves next time; if too strong, reduce the amount. Don't pack the infuser too tightly; tea leaves need room to expand and unfurl properly for full flavor extraction. The generous mesh infuser in this teapot provides ample space for leaves to open fully, which is essential for premium loose-leaf teas that can expand to several times their dry size.

5 to 7 working days.

Yes. All InstaCuppa products come with 1 Year Warranty. For more details please check the Warranty section.

No.

No. Please check the “Warranty” Section For More Details.

Please check the “Videos” tab.

China